| |
|
ISO 13706:2005, Petroleum, petrochemical and natural gas industries - Air-cooled heat exchangers
ISO/TC 67/SC 6
Multiple. Distributed through American National Standards Institute (ANSI), 2007
ISO 13706:2005 gives requirements and recommendations for the design, materials, fabrication, inspection, testing and preparation for shipment of air-cooled heat exchangers for use in the petroleum and natural gas industries. ISO 13706:2005 is applicable to air-cooled heat exchangers with horizontal bundles, but the basic concepts can also be applied to other configurations.
|
|
|
|
|
|
| |
|
ISO/IEC 11172-3:1993, Information technology - Coding of moving pictures and associated audio for digital ...
ISO/IEC JTC 1/SC 29/WG 11
Multiple. Distributed through American National Standards Institute (ANSI), 2007
Specifies the coded representation of high quality audio for storage media and the method for decoding of high quality audio signals. Is intended for application to digital storage media providing a total continuous transfer rate of about 1,5 Mbit/s for both audio and video bitstreams, such as CD, DAT and magnetic hard disc, and for sampling rates of 32 kHz, 44,1 kHz, and 48 kHz.
|
|
|
|
|
|
| |
|
ISO 1000:1992, SI units and recommendations for the use of their multiples and of certain other units
ISO TC 12
Multiple. Distributed through American National Standards Institute (ANSI), 2007
Describes the International System of Units SI, recommends selected decimal multiples and submultiples for general use, gives certain other units which may be used with the SI, and quotes the definitions of the SI base units.
|
|
|
|
|
|
| |
|
IEC 60169-2 Ed. 1.0 b:1965, Radio-frequency connectors. Part 2: Coaxial unmatched connector
IEC TC/SC 46F
Multiple. Distributed through American National Standards Institute (ANSI), 2007
Gives the dimensions of connectors and gauges as well as the schedule for type tests. This title may contain less than 24 pages of technical content.
|
|
|
|
|
|
| |
|
ISO 22000:2005, Food safety management systems - Requirements for any organization in the food chain 1 review
ISO/TC 34
Multiple. Distributed through American National Standards Institute (ANSI), 2007
Product meets spec
The ISO 22000 product is as advertised, a thorough description of the requirements of Food Safety Management Systems.
|
|
|
|
|
|
| |
|
ISO 13007-2:2005, Ceramic tiles - Grouts and adhesives - Part 2: Test methods for adhesives
ISO/TC 189
Multiple. Distributed through American National Standards Institute (ANSI), 2007
ISO 13007-2:2005 specifies methods for determining characteristics for adhesives used in the installation of ceramic tiles. The following test methods are described: determination of open time; determination of slip; determination of shear adhesion strength; determination of tensile adhesion strength; determination of transverse deformation; and determination of chemical resistance.
|
|
|
|
|
|
| |
|
IEC 60169-1 Ed. 2.0 b:1987, Radio-frequency connectors. Part 1: General requirements and measuring methods
IEC TC/SC 46F
Multiple. Distributed through American National Standards Institute (ANSI), 2007
Serves as a generic specification providing the basis for the sectional standards which apply to individual connector types. Establishes uniform concepts and procedures concerning : -terminology; -standard ratings and characteristics; -testing and measuring procedures concerning electrical electrical and mechanical properties; -classification of connectors with regard to environmental testing procedures involving temperature, humidity and ...
|
|
|
|
|
|
| |
|
ISO 10993-6:1994, Biological evaluation of medical devices -- Part 6: Tests for local effects after ...
ISO TC 194/WG 10
Multiple. Distributed through American National Standards Institute (ANSI), 2007
Specifies test methods for the assessment of the local effects of an implant material on living tissue, at both the macroscopic and microscopic level. The local effects are evaluated by a comparison of the tissue response caused by a test specimen to that caused by materials used in medical devices whose clinical acceptability has been established. The test methods for local effects after implantation are used to assess subchronic effects ...
|
|
|
|
|
|
| |
|
ISO 129-1:2004, Technical drawings - Indication of dimensions and tolerances - Part 1: General principles
ISO/TC 10/SC 1
Multiple. Distributed through American National Standards Institute (ANSI), 2007
ISO 129-1:2004 establishes the general principles of dimensioning applicable for all types of technical drawings.
|
|
|
|
|
|
| |
|
ISO 5859:1991, Aerospace - Graphic symbols for schematic drawings of hydraulic and pneumatic systems and ... 1 review
ISO TC 20/SC 10/WG 5
Multiple. Distributed through American National Standards Institute (ANSI), 2007
Discusting Rip Off
This so called book is 24 pages long. The first page has one blurry picture of a correction to one single ISO hydraulic symbol but even this one symbol is not identified. The next 23 pages are blank and labeled NOTES: The people who are selling this "book" should be in jail for fraud.
|
|
|
|
|
|
| |
|
ISO 8549-2:1989, Prosthetics and orthotics -- Vocabulary -- Part 2: Terms relating to external limb ...
ISO TC 168/WG 1
Multiple. Distributed through American National Standards Institute (ANSI), 2007
Includes 19 definitions of terms used to describe the level of amputation of limbs and limb deficiencies present at birth and their correction. It complements part 1 of this ISO 5849 series.
|
|
|
|
|
|
| |
|
ISO 13379:2003, Condition monitoring and diagnostics of machines -- General guidelines on data interpretation ...
ISO/TC 108/SC 5
Multiple. Distributed through American National Standards Institute (ANSI), 2007
ISO 13379:2003 gives guidance for data interpretation and diagnostics of machines. It is intended to allow the users and manufacturers of condition monitoring and diagnostics systems to share common concepts in the fields of machine diagnostics; to enable users to prepare the necessary technical characteristics that will be used for the further diagnosis of the condition of the machine; and to give an appropriate approach to achieve a diagnosis ...
|
|
|
|
|
|
| |
|
ISO/IEC 20000-2:2005, Information technology - Service management - Part 2: Code of practice 1 review
ISO/IEC/JTC 1/SC 7
Multiple. Distributed through American National Standards Institute (ANSI), 2007
Quite expensive
This is not worthwhile to buy this book. It is thin and its content are just something you have practiced for a long time. You don't get any insight.
|
|
|
|
|
|
| |
|
ISO 14021:1999, Environmental labels and declarations -- Self-declared environmental claims (Type II ...
ISO TC 207/SC 3/WG 2
Multiple. Distributed through American National Standards Institute (ANSI), 2007
This International Standard specifies requirements for self-declared environmental claims, including statements, symbols and graphics, regarding products. It further describes selected terms commonly used in environmental claims and gives qualifications for their use. This International Standard also describes a general evaluation and verification methodology for self-declared environmental claims and specific evaluation and verification methods ...
|
|
|
|
|
|
| |
|
ISO 22846-1:2003, Personal equipment for protection against falls - Rope access systems - Part 1: Fundamental ...
ISO/TC 94/SC 4
Multiple. Distributed through American National Standards Institute (ANSI), 2007
ISO 22846-1:2003 gives the fundamental principles for the use of rope access methods for work at height. It is intended for use by employers, employees and self-employed persons who use rope-access methods, by those commissioning rope-access work and by rope-access associations. ISO 22846-1 is applicable to the use of rope-access methods on buildings, other structures (on- or offshore) or natural features (such as cliff faces), during which ...
|
|
|
|
|
|
| |
|
ISO 13658:2000, Zinc sulfide concentrates - Determination of zinc content - Hydroxide precipitation and EDTA ...
ISO TC 183/WG 6
Multiple. Distributed through American National Standards Institute (ANSI), 2007
This International Standard specifies a hydroxide precipitation and EDTA titrimetric method for the determination of the zinc content of zinc ores and concentrates containing 10 % (m/m) to 60 % (m/m) zinc.
|
|
|
|
|
|
| |
|
ISO 13380:2002, Condition monitoring and diagnostics of machines - General guidelines on using performance ...
ISO/TC 108/SC 5
Multiple. Distributed through American National Standards Institute (ANSI), 2007
This International Standard describes the general conditions and procedures for recording, assessment, evaluation and diagnostics of machine condition by measuring parameters related to machine performance, condition and safety, including thermal, electrical and hydraulic parameters where applicable.The procedures relate to operational monitoring of machines, and include all components and sub-assemblies necessary to provide the functional ...
|
|
|
|
|
|
| |
|
ISO/IEC 20000-1:2005, Information technology - Service management - Part 1: Specification 1 review
ISO/IEC/JTC 1/SC 7
Multiple. Distributed through American National Standards Institute (ANSI), 2007
Good guidance
I think it is decent guidance. As for any type of assessment, it is all in your scope and how you interpret the guidance. Even if you do not pay to be ISO certified compliant, it is good to use to assess your processes against. There are no maturity levels here. It is all or nothing with ISO.
|
|
|
|
|
|
| |
|
ISO/IEC 17799:2005, Information technology - Security techniques - Code of practice for information security ...
ISO/IEC/JTC 1/SC 27
Multiple. Distributed through American National Standards Institute (ANSI), 2007
ISO/IEC 17799:2005 establishes guidelines and general principles for initiating, implementing, maintaining, and improving information security management in an organization. The objectives outlined provide general guidance on the commonly accepted goals of information security management. ISO/IEC 17799:2005 contains best practices of control objectives and controls in the following areas of information security management:security policy; ...
|
|
|
|
|
|
| |
|
ISO 10258:1994, Copper sulfide concentrates -- Determination of copper content -- Titrimetric methods
ISO TC 183
Multiple. Distributed through American National Standards Institute (ANSI), 2007
Specifies two titrimetric methods for the determination of the copper content of copper sulfide concentrates in the range 15 % (m/m) to 50 % (m/m), titrating free iodine isolated by reaction between iodide ions and copper(II) ions with sodium thiosulfate using soluble starch as the indicator after separation (method 1) or without separation (method 2) of copper from interfering elements. This title may contain less than 24 pages of technical ...
|
|
|
|
|
|