Suche electronics:   



Hot Link Pro Remote Control Booster System

Microsmith

Microsmith

average customer review:based on 243 reviews
view larger image
 for more information click here

   highly recommended  highly recommended



Great performance

This thing just works great. I routed the sensor up from under the TV where the equipment is stored (behind a cabinet door), thorugh the hole where the wires go to the TV, and then taped it to the TV stand with clear packing tape. It is nearly invisible, and works great. This is highly recommended. I have two of these now, one upstairs in our bedroom and one in the family room.


Super-Satisfied After More Than One Year of Use

I've owned a Microsmith Hotlink Pro for over a year. It was easy to install and has been spot-on perfect in use ever since. I never needed tech support in any real sense, but when I made some major rearrangements to my home A/V setup, I needed to reset all of the emitters, so I needed more adhesive pads to re-stick my emitters. I called to order more -- and I was sent more *free*. I've actually talked to the owner/designer, Marcus Smith, on the phone before (about trying to integrate my Hotlink Pro with my new Redeye iPhone/iPod Touch universal remote system RedEye Universal Remote System for iPhone, iPod touch and iPad). He was so gracious, friendly and helpful about how best to integrate the two, I found myself thinking, "I wish more of the stuff I own was made by Microsmith." If you buy this, I doubt you'll need any support, but if you call, you can be sure of plenty of friendly, responsive help.


 for more information click here







 for more information click here


Exactly what I wanted...

I purchased this item to replace a Cables To Go Remote Repeater (model 40430) which had died on me after six months. But having used the Hot Link Pro System and the Cables To Go, I can offer a fair comparison. Its really night and day in my opinion. With the Hot Link system we can sit anywhere in the room and operate the remote to control our equipment (which sits inside a cabinet with closed doors), it does not require direct line of sight. This is a very different experience that with the Cables To Go which required direct line of site which often required pointing the remote directly at the sensor. A couple other points: both systems are very easy to setup and the sensor with the Hot Link System, because it does not require direct line of sight, can be placed in less obvious and noticable locations. One setup item that was slightly confusing was placing the sensor in a location where it did not have interference from the TV. The LED indicator lights up a continuous blue if there is interference, but once I figured out that you have to cover part of the sensor to avoid the interference it was no problem at all (if I had read the instructions first it would have been even easier to figure this out.)

This is a more expensive option than the Cables To Go unit that I replaced, but definitely worth the extra money.


 for more information click here






Worked perfect

This thing works great. Stuck the receiver behind my LED TV and then just mounted the IR transmitters inside my cabinet door (partially laziness and partially so I didn't have to connect each transmitter on the device and have more wire mess). The thing worked great on first shot with my U-Verse (Motorola) box, Sony receiver, LG DVD player & Sony CD changer.


Awesome product, awesome service

First of all this unit works perfectly. The IR receiver is extremely sensitive, you can mount it almost anywhere and it will pick up the signal from your remote. No more stretching to reach your A/V equipment that your coffee table is blocking (or if its mounted in a cabinet). There are absolutely no delays from when you press a button on your remote to when that action happens on the equipment. If you have a plasma TV make sure you mount the IR receiver behind the TV otherwise it will pick up infrared noise.

Secondly, shortly after my cat decided to chew on one of the IR emitters I had mounted on my receiver. He destroyed it so I emailed Microsmith and no questions asked they replaced the entire unit at no charge! What customer service!


 for more information click here


reviews: page 1, 2, 3, 4, 5, 6, 7, 8, 9, 10



Hot Link Pro completes your home theater system with a super slim-line infrared eye!The Hot Link patented system constantly monitors the ambient light and noise floor. In darker ambient light it becomes more sensitive to remote control pulses, making the eye the most sensitive it can be based on ambient light environment. When the eye is in a "hidden" location behind a speaker grill, tucked up in a toe-kick or in a door slot it compensates for the expected loss in distance by becoming more sensitive to the pulses emitted from remote controls. Get great remote control roaming freedom, and enhanced beauty of your home theater.


 for more information click here



hot or not?    What's your opinion?     Write a review and share your thoughts!



recommendations

Home Entertainment... defined




booster

Electroline EDA-2800 Eight Port Cable TV HDTV Signal ...
STICK-ON IR EMITTER BY SMARTHOME ( 8170S )
iLuv I604BLK Battery Booster with Silicon Skin for iPod Classic and ...
TCC TC-780LC Stereo Line Level Amp / Booster with iPod Jack
Microsmith Hot Link XL Cat 5 Extendable IR Booster System



control

Apple iPod touch 8 GB (3rd Generation) NEWEST MODEL
Canon Wireless Remote Control RC1 for Digital Rebel
Apple iPod touch 64 GB (3rd Generation) NEWEST MODEL
Logitech Harmony One Advanced Universal Remote [Amazon ...
150W Smart Ac Adapter



link

Samsung WIS09ABGN LinkStick Wireless LAN Adapter
Cables Unlimited PCM-2296-06 HDMI to DVI D Single Link Cable (6.56 ...
Mini DisplayPort to DVI Female Adapter Cable for Apple Macbook, ...
Sony ICD-PX720 Digital Voice Recorder with PC Link
Cables To Go - 26911 - 2M DVI-D M/M Dual Link Digital Video Cable ...



search in the category 'electronics'
hot link pro, booster, control, link, pro, remote, system


Impressum / about us


Suche electronics: